The UAP+ Zero Lift Cylinder is a high quality 6 pin TS 007 1* BSi Kitemark Cylinder that offers a low cost solution to lock snapping and lock bumping. It is manufactured with added steel pins inside the cylinder for enhanced strength and security to make it stronger and even more resilient to drilling than ever before. This high security cylinder has extra features to protect against forced entry. These include: 

Anti-Snap: The cylinder has an anti-snap line on each end so when force is applied to either side, the cylinder will break away to the anti-snap line only and not at the cam point. This prevents entry being gained through the exposed cam.

Anti-Bump: The cylinder has a ‘zero lift’ pin which sits far higher than the rest of the pins in the plug ensuring a bump key shoulder cannot touch the pin to bump it. 

Anti-Pick: 3 x Stainless Steel Anti-Pick pins in each side of the cylinder. 

Anti-Drill: 4 x hardened steel Anti-Drill pins in each side of the cylinder, 2 in the plug and 2 in the barrel. These require a special drill bit to break through. Common drill bits will have no effect.

Conform to EN1303:2005 standards

Awarded ‘Secured by Design’ approval by the Association of Chief Police Officers

Awarded the British Standard Kitemark from BSi, number KM 561977

In combination with a TS 007 2* security handle it is almost unbeatable.

As featured on Smooth Radio, Real Radio Yorkshire and Tower FM. 

For more information, please visit www.UpgradeMyLocks.com